|
|
|
|
|
|
|
|
|
|
|
G. Gene Abbey
Systems Engineer with extensive experience in large
electro mechanical systems, real time computation, and servo mechanisms.
Four years experience in automotive electrical engineering. Forty plus
years experience in development of simulation devices for training.
Applications included aircraft pilot training, space flight astronaut
training , driver training and nuclear power plant operator training.
Prior professional society memberships: IEEE, AIAA, SAE. He has a
bachelor of science degree in electrical engineering.
S. Kamal Ahmed Computer engineer
with over 15 years of hands-on computer and networking design,
installation, repair, and troubleshooting experience on equipment
ranging from SuperMINI’s to PC’s, from local area networks to
Internet Service Provider networks with specific focus on Protocol
analysis, network testing, and
implementation of disaster recovery procedures.
Trained and experienced on Hewlett Packard Advanced HP/UX,
Telecommunication Management Networks, SONET, DS1 testing, DDS testing,
Hands-on SNMP, and HACMP administration, TCP/IP, DEC Pathworks, DEC
UNIX, VAX/VMS, Novell Netware, Zero Slot LANs, Sco UNIX, Windows NT
Server and Workstation, Windows 95, Windows 3.11, and DOS. He has
a batcelor of science degree in electrical engineering. David Cutler Mr. Cutler has over 20 years of experience within large
and small information technology organizations. This experience
includes all aspects of the software development process, as well as
selection and implementation of COTS software products. His
business continuity & disaster recovery planning and testing
experience includes designing processes for recovery of same-site
machine failures, coordinating setup of alternate hot computer sites and
business processing sites, as well as developing procedures for
restoring PC and LAN-based systems following a business
interruption. Additional experience includes: Development and
implementation of software development methodology; technical writing;
business process impact analysis; test plan development, staff
management & recruiting; and process redesign. John
B. Hamilton John is an Electrical Engineer with extensive
experience in design and development of digital data communications
equipment for the communications industry and control devices / systems
for the automobile and manufacturing enviroment.
Specialties in microprocessor design with specific experience with :
Motorola - 68xxx based system, Intel - 80xx, 286,486, Zilog
- Z80, Atmel ARM, Rockwell - 6502, and AT&T - DSP16A. Local
and wide area network experience - 10Base5, 10Base2, 10BaseT, HDLC, SDLC,
X.25, T1, ATM, Satillite and FDDI. Experience with communications
interfaces - RS232, RS530, V.35, V.11, RS449, RS422, RS366, RS485,
Bipolar AMI, and 4-20ma. Software design experience :
Tango, Orcad, ViewLogic, Protel, Autocad, Palasm, Calay Prisma, Xilinx
(Future Net), and AMD Mach (Orcad/Palasm). Bachelor of Science
Electrical Engineering Technology from Virginia Polytechnical
Institute and State University (VA Tech) 1976 ,with special studies in
communications and control systems. Geniver Montalvo Twenty
five plus years experience in engineering, accounting, and financial
analysis; project submittal and implementation. Projects include:
billing, help desk, intranet, internet, inventory, invoicing, management
information, navigation, payroll, performance monitoring, scheduling,
and workflow applications; computer simulations of bio-mechanical
and electro-mechanical systems; and custom interface hardware and
software for microcomputers. .Skilled
in Assembler, BASIC, Clipper, Crystal Info, FORTRAN, FoxPro, HEAT, Lotus
Notes & Domino, Omnis, Oracle, Pascal, PeopleTools, SQL, SQR. MBA,
University of Virginia 1978, BSE, Electrical Engineering, University of Pennsylvania
, 1973 Juan Noli F. Ochoa Emergency Services Equipment Loss Consulting Recent Projects Meet the Experts |
|
